Buenas eléctrico, pues copiarlo , como ya sabes no tiene misterio, a veces no vemos lo más obvio

Te transcribo la información para refrescarte y a ver si encuentras donde te atascas.

DIY Instructions

View the release note below.
Download the firmware from http://www.oppodigital.com/Download/...1h-11-0830.iso
Burn a CD from the downloaded ISO image file. Be sure to burn the CD as an ISO image file, not a data file. The CD should contain a 935.BIN file if you burned it successfully. Please consult your CD burning software's help/instruction manual for more information on how to do this. Some general instruction for common CD burning software is listed below.
Turn on your TV display and the OPPO player.
Open the player tray and insert the firmware CD, and then close the tray.
As soon as the CD is loaded, you will see "Press Play To Start" on your TV display. Press the PLAY key on the remote or the player once.
The TV display shows "File Copying" and then "UPGRADING"
In about 8 seconds, the CD will be ejected. Remove the CD quickly; DO NOT DO ANYTHING ELSE. What follows is the process when the player will reboot itself.
DO NOT PRESS ANY BUTTONS NOR ATTEMPT TO CLOSE THE TRAY NOR UNPLUG THE POWER DURING THE REMAINING UPGRADE PROCESS.
After approximately 1 - 2 minutes, the player reboots itself and closes the tray automatically to complete the process. The update process is completed when the front panel of the DVD player shows "No Disc".
Eject the disc tray and then press the "OSD" button on the remote control to verify the firmware version.
Congratulations! You have just completed the firmware upgrade.



En cuanto a la segunda pregunta, por el momento creo que NO.



Un saludo